-- SPECIAL NOTICE --
Our offices will be closed from Thursday, November 27th through Friday, November 28th.

MCS Parts

Master Cinema Series Parts
HDMI 90 Degree Cable

CODE: HDMI-90-CABLE

$20.00

This is a replacmenet cable for the Letus HDMI clamp . It is a 36" (91cm) right angle HDMI cable for guaranteed compatibilty with the clamp.... More 


MCS Padded Long Weight - Pad Only

CODE: MCS-LW-PAD

$45.00

Replacement pad for the MCS Padded Long Weight. This is the pad ONLY. Features: Memory foam padding Black and brown genuine... More 


LP-E6 Cage Battery Dongle - MCS

CODE: MCS-LPE6-DC

Out-of-stock
$49.00

Battery dongle for use the MCS Canon 5D/7D cage. Dongle plugs into inside of 5D/7D powered cage battery port and is inserted into the camera. NOTE:... More 


MCS Top Clamp to Rails

CODE: MCS-TOP-CR

$65.00

The top clamp to rails/rods bracket is designed for use on our Top Quick Release Clamp. This piece attaches to the quick release clamp allowing you to... More 


MCS Top Iris Rods (20cm)

CODE: MCS-TOP-RODS-BK

$65.00

These black, anodized aluminum rods are standard 15mm diameter and measure just under 8 inches in length (20cm). They are designed for mounting a remote... More 


HDMI Clamp with Cable

CODE: HDMI-CLAMP-CABLE

$65.00

This HDMI clamp is designed to work with the Master Cinema Series DSLR cages.  It is machined from billet aluminum and hard anodized to match the... More 


MCS Top Dovetail

CODE: MCS-TOP-DT

$70.00

The dovetail rail is designed to work with our Top Quick Release Clamp or the TaG Tiny Receiver. Typically mounted to a camera cage, the dovetail allows... More 


MCS Back Pack

CODE: MCS-BP

$75.00

The Master Cinema Series Backpack is a compact way to carry camera accessories tethered to the main rig. This setup allows you to move the weight off of... More 


LEMO to LP-E6 Adapter

CODE: LEMO-LPE6

$77.00

This cable will allow you to power an EVF, that uses the standard LP-E6 battery pack, from the MCS Powered cages. This cable supplies non-regulated power... More 


MCS Rear Stabilizer

CODE: MCS-RS

$80.00

The MCS Rear Stabilizer is designed to add a secondary stabilization point for the MCS camera interface plate. Ported for standard 15mm rods, the... More 


MCS T-Handle Clamp

CODE: MCS-T-H-CLAMP

$85.00

This is the T-Handle to 15mm rods clamp. The rod holes are standard 15mm round while the t-handle holes are designed to only accept our hybrid support... More 


MCS Camera Interface Plate

CODE: MCS-CIP

$85.00

The MCS Camera Interface Plate attaches to the MCS baseplate and rear stabilizer to the bottom of our MCS Camera cage or, in some cases, directly to the... More 


Letus Rail to Coldshoe Adapter

CODE: MCS-COLD-SHOE

$99.00

The Letus Rail to Cold shoe mount allows you to attach Hot Shoe mount devices to standard 15mm rods. One side of the Cold Shoe has a un-powered Hot Shoe... More 


Letus Cheeseplate V2

CODE: LT-CHSE-PLT-V2

$99.00

The Letus Cheeseplate is the perfect accessory for the Master Cinema Series bundles . The cheese plate can be hard mounted to the Letus TaG baseplates.... More 


Letus Battery Plate

CODE: LT-BATTMOUNT

$120.00

The Letus Battery Plate is an Anton Bauer Compatible battery plate. Employing three solid mechanical connections and self-cleaning, goldplated... More 


Letus Quick Snap Lens Support

CODE: LT-QSLS

$125.00

The Letus Lens Support Bracket features a 1/4" thumb screw and stainless steel height adjustable post on an industry standard 15mm rod clamp. Use... More 


MCS Standard Counter Weight

CODE: MCS-CW-2

$130.00

The Master Cinema Series Standard Counter Weight is a CNC machined 5 pound piece of solid steel. It features standard 15mm porting for mounting... More 


Stainless Steel Base Rods (30cm / 12in)

CODE: MCS-SS-BASE-RODS-30CM

$135.00

These stainless steel support rods are standard 15mm diameter. They measure 30cm (11.8") in length and are machined from high grade stainless steel.... More 


Regulated LP-E6 to D-Tap Adapter

CODE: LT-LPE6-DTAP

$150.00

This is a internally regulated LP-E6 adapter to enable the use of external power source (12-18V) on any device that uses the LP-E6 battery. This... More 


MCS Top Quick Release Clamp

CODE: MCS-TOP-QR-CLAMP

$160.00

The Top Quick Release Clamp is an integral part of the Master Cinema Series. Designed to quickly clamp and release to the Letus dovetail system, this... More 


Stainless Steel Base Rods (45cm / 18in)

CODE: MCS-SS-BASE-RODS-45CM

$160.00

These stainless steel support rods are standard 15mm diameter and tapered on both ends for easy accessory insertion. They measure 45cm (17.75") in... More 


MCS Shoulder Pad

CODE: MCS-PAD

$160.00

The Master Cinema Series shoulder pad is made out of genuine leather and memory foam. Designed for all day comfort, this shoulder pad features a built in... More 


MCS Padded Long Weight

CODE: MCS-LG-WT

$175.00

The Master Cinema Series Padded Long Weight is designed for extra support and balance when using a shoulder cam rig. The weight is designed to drop... More 


MCS Top Handle (Version 2)

CODE: MCS-HANDLE-V2

$195.00

The Master Cinema Series Version 2 Top handle is a versatile grip point that can be mounted directly to Letus MCS cages. The handle features a stainless... More 


MCS Top Clamp Kit

CODE: MCS-TOPCLAMP-KIT

$325.00

The Top Clamp kit includes our Master Cinema Series quick release top clamp, clamp to rods bracket, dovetail plate, and 20cm black anodized rods. Attach... More 


MCS T-Handle Kit

CODE: MCS-T-HANDLE

$345.00

The complete T-Handle kit featured in the Master Cinema Series bundles. The T-Handles are designed to mimic the feel of grabbing the mattebox frame in a... More 


Compact EVF Knuckle

CODE: LT-EVF-CKN

$399.00

The new Compact EVF Knuckle is a key component of the TaG Simple Shoulder Rig. The design mimics the feel of a proper viewfinder on a 35mm film camera.... More 


MCS Baseplate

CODE: MCS-BASE

$420.00

The core of the entire Master Cinema Series line. The MCS V-Mount baseplate is designed to quickly convert from one rig to another. The patent pending... More 


MCS Eyepiece Leveler

CODE: MCS-EYE-LEVELER

$650.00

The Eyepiece leveler is a key component of the Master Cinema Series Studio Cam bundle. It allows the EVF to remain relatively level while tilting the... More 


Letus Follow Focus

CODE: LD-FF

$950.00   $799.00
-16%

Note: We hand test each follow focus before shipping so there may be a delay in shipment as we build and test each unit. Features:... More 

Loading...